Automatic feeding
The feeder delivers galvanized steel strip to the set position.
Powered high-speed fastening that drives metal buckles into plywood at set positions, running at 30–60 fastenings a minute.

Once panels are sized, the DA-8000 drives metal fasteners into plywood at programmed positions, forming the connection base for steel-edge assembly. This version makes male buckles only — for matched male and female buckles from one machine, see the Male–Female Buckle Machine. A Siemens PLC with Inovance servo drive holds fastening positions steady through long runs, while the 120 kg hydraulic die assembly and triple-enlarged outlet keep cycles smooth. An automatic steel strip decoiler and feed rack come as standard.
30–60 fastenings per minute for high line throughput
Siemens PLC + servo positioning keeps assembly consistent
Emergency stops and photoelectric sensors protect operators
Suits different panel thicknesses (5–12 mm) and fastener specifications
Nailless plywood boxes
Collapsible wooden boxes
Steel-edged export cases
Reusable industrial transport boxes






Standard configuration data. Machines are configured to order — contact us for values matched to your product.
| Model | DA-8000 (high configuration) |
|---|---|
| Motor power | 6 kW |
| Fastening speed | 30–60 /min |
| Applicable steel strip width | 50 mm |
| Applicable panel thickness | 5–12 mm |
| Max. assembly length | 9,000 mm |
| Machine size (L×W×H) | 2,450 × 800 × 1,600 mm |
| Machine weight | 1,000 kg |
| Recommended working area | 3 × 3 m |
The standard configuration of the DA-8000. Alternative brands and upgraded configurations are available on request.

| Control system | PLC control system | Siemens, Germany |
|---|---|---|
| Servo drive & motor | Servo system | Inovance |
| Planetary reducer | Precision planetary reducer | Zhongda Leader |
| Hydraulic die assembly | 120 kg, triple-enlarged outlet design | |
| Bearings & screws | 304 stainless steel | |
| Springs | Precision die springs | Daido, Japan |
| Electrical components | Low-voltage electrics set | CHINT |
| Proximity switches | Position sensing set | Xinling |
| Dust protection | Full dust-proof design with cover | |
| Included accessories | Automatic steel strip decoiler + feed rack |
The feeder delivers galvanized steel strip to the set position.
The panel is clamped and lined up precisely with the die.
The punch drives the fastener home and secures it in one action.
The punch returns and the workpiece moves on to the next cycle.
Look over the guards, chains, dies and feed track, and fit the dies for the buckle type in use. Run the machine empty for 1–2 minutes and check that it runs smoothly and quietly.
Set the matched steel strip into the die the right way round. Keep the feed track clear — no stacking, no jammed buckles.
Lay the plywood panel flat on the worktable and line the fastening point up with the center of the die. Hold the panel firm so it cannot move.
Steady the panel with one hand and press start with the other. The machine feeds, presses and resets on its own.
Work the box through each fastening point at a steady pace. Check every point: buckles flat, tight and undamaged, with no cracks or dents in the panel.
Run the machine empty for 10–20 seconds to clear the track, then stop and switch off. Clean the table, track and dies, and log the run.
Safety: keep hands out of the pressing, feeding and transmission zones while the machine runs. Stop immediately on jamming, unusual noise or a mis-fastened buckle — never run a faulty machine.