Load the panel
Set the plywood sheet on the worktable and lock it in place with the purpose-built clamps.
Computer-controlled rip and cross cutting that brings plywood panels to exact size ahead of buckle fastening and steel-edge assembly.

The CNCJ-1224 opens the nailless plywood box line. It cuts plywood to programmed sizes with repeatable rip and cross cuts, so buckle fastening, steel-edge forming and pressing all begin with panels that are accurate and consistent. Digital setup makes the machine simple to run and keeps results steady from batch to batch and shift to shift.
Programmed rip and cross cuts produce panels that repeat to size
Fast cutting keeps downstream stations supplied
CNC control makes operation simple and cuts batch variation
Panels feed straight into fastening and edge forming
Sizing plywood panels for nailless boxes
Panel preparation for steel-edged boxes
Components for collapsible boxes
Panel production for export cases
Standard configuration data. Machines are configured to order — contact us for values matched to your product.
| Max. processing length | 2,600 mm |
|---|---|
| Max. processing width | 1,300 mm |
| Max. cutting thickness | 100 mm |
| Cutting speed | 0–36 m/min |
| Blade speed | 5,000 rpm |
| Total installed power | 21 kW |
| Working air pressure | 0.6–0.8 MPa |
| Machine size (L×W×H) | 4,000 × 2,200 × 2,000 mm |
| Machine weight | Approx. 3,000 kg |
The standard configuration of the CNCJ-1224. Alternative brands and upgraded configurations are available on request.
| Machine bed | High-strength annealed bed | Shuozhan |
|---|---|---|
| Guide rails | Premium dust-proof 30 series × 8 | HIWIN |
| Cutting motors | 9 kW × 2 | Weihai |
| Scoring motors | 1.5 kW × 2 | Optional |
| Inverters | 7.5 kW × 2 | Olino |
| Rack | T3210 | TBI |
| Servo motors | 1.5 kW × 3 | Inovance |
| Reducers | Planetary reducers × 2 | Shinpo |
| Control system | A6 CNC system | Baoyuan, Taiwan |
| Electrical components | Low-voltage electrics set | Delixi |
| Clamps | Purpose-built clamp sets × 6 |
Set the plywood sheet on the worktable and lock it in place with the purpose-built clamps.
Key length, width and quantity into the CNC system — stored programs come back instantly for repeat orders.
Longitudinal and transverse cuts finish in a single cycle at up to 36 m/min.
Cut panels stack ready for buckle fastening and steel-edge assembly.